PCB Prototype for $2 (Any Color) ^ https://jlcpcb.com ^
This homemade power nibbler fits into the chuck of a mains power angle grinder and is capable of cutting sheet steel up to 3mm. For best results the drill speed should be in the range of 1500 to 3000 rpm. It works on the same punch and die system as a true powered nibbler, effectively removing tiny crescent-shaped pieces of waste in a continuous chain.If you want to cut aluminium, please use a cutting lubricant or soap. Some alloys are sticky and will clog the nibbler with waste. #nibbler #homemade #angle #grinder #howto
This homemade power nibbler fits into the chuck of a mains power angle grinder and is capable of cutting sheet steel up to 3mm. For best results the drill speed should be in the range of 1500 to 3000 rpm. It works on the same punch and die system as a true powered nibbler, effectively removing tiny crescent-shaped pieces of waste in a continuous chain.If you want to cut aluminium, please use a cutting lubricant or soap. Some alloys are sticky and will clog the nibbler with waste. #nibbler #homemade #angle #grinder #howto
Hi, im a Pensioner . Apart from my work i like DIY stuff, lifehacks, how to make, experiments, well everything that can be made by hand in a home enviorment. This channel ” Rough Hands and Unusual Ideas ” about new and old ideas that you might have known . This channel is a HACK COLLECTION. It’s an entartainment oriented channel, so do not try to repeat at home everything you see, as it might be dangerous. So take care of your health.